[Smart APP Remote Control Up to 98FT] Control your plasma cutter from up to 98 ft (30 m) away via Bluetooth APP. Adjust cutting current, switch cutting modes, save preferred settings, monitor operating status, and check error codes directly from your phone. Reduce trips back to the machine and work more efficiently—ideal for workshops, auto repair, farms, garages, and DIY projects.
[Professional Cutting Power] Advanced IGBT inverter technology delivers stable, efficient cutting performance on both 110V and 220V. Cuts steel, stainless steel, aluminum, copper, and other conductive metals up to 2/3" max thickness. Recommended capacity: 1/2" @ 35A on 110V 50 PSI; 2/3" @ 50A on 220V 65 PSI. Clean, dry compressed air required. Recommended circuit breaker: up to 40A @ 110V; up to 30A @ 220V.
[Pilot Arc Cutting & Rust Removal] Cut directly through rusted, painted, or coated metal with the non-touch pilot arc—no surface prep required. For a cleaner work surface, switch to the dedicated Rust Removal mode to remove surface rust first, then start cutting. Adjustable pilot arc time up to 15s also supports mesh and expanded metal cutting while helping reduce prep time and electrode wear.
[Built-In Air Sensor & Instant Setup] The integrated air pressure sensor displays real-time PSI on the front panel, so you always know your air supply is within the optimal range (50–80 PSI recommended). The built-in metal air filter keeps moisture and debris out of the torch, and the included 1/4" NPT quick-connect fitting means you're ready to cut within minutes of unboxing. Works with any standard air compressor.
[Large LED Display Know What's Happening at a Glance] The centrally positioned LED screen shows air pressure, voltage, and current in real time no guesswork, no stopping to troubleshoot. If something's off, the built-in error code system pinpoints the issue instantly, so you can get back to cutting faster. Full visibility means more confidence, fewer mistakes, and less time wasted on diagnostics.
[Smart Cutting Control Set It and Cut] 4T mode lets you start and stop cutting with a single trigger press, keeping your finger relaxed during long cuts. 2T mode gives you instant on/off control for short, precise cuts. The adjustable post-flow cooling (3 - 15s) automatically cools the torch head after each cut, protecting consumables and extending torch life we recommend 4–8 seconds for most projects. Less wear, longer life, lower running costs.
[Trusted by 2,600+ Customers for Home, Farm & Workshop] From backyard DIY projects and auto body repairs to farm equipment maintenance and metal fabrication this plasma cutter is built to handle real-world cutting tasks without a steep learning curve. Compact and portable at just 15 lbs, it's easy to move between job sites. Backed by Bestarc's dedicated US support team, with replacement consumables and parts readily available.
Passer au contenu
