80A CNC Plasma Cutter, Non-HF, 5/8" Clean Cut, 1.57" Max Cut

$899.99 USD $649.99 USD SAVE 28%

3 Year Warranty

Pre-sale, save 15% when you add to cart!

Voltage Specification: 110-220V Dual Voltage

110-220V Dual Voltage
220V Single-phase Voltage
380V Three-phase Voltage
Compare

Features:

  1. Blow Back CNC plasma cutter
  2. Easy to Set Up, PT/2T/4T/PA Function
  3. IGBT Inverter Technology
  4. Built-in air filter
  5. Circuit Breaker Requirements:60A for 110V, 50A for 220V
Key Features & Benefits
  • [Powerful Cutting Ability] Dual voltage 110/220V good for home, workshop and hardware shop use. Professional performance 1/2”clean cuts on Iron, Steel aluminum and copper with Inverter IGBT Technology. Very powerful for DIY and heavy duty project. The Maximum cutting thickness is recommended to 5/8”(16mm)@40A 110V 60PSI; 1.57”(40mm)@80A 220V 70PSI. Dry and compressed air is required. Power breaker up to 60A@110V 40A; Up to 50A@220V 80A.
  • [Blow Back Pilot Arc]: Bestarc plasma cutter features a blow back Technology, Non-HF pilot arc with CNC capability, Which prevents high-frequency signal interference and enhances cutting stability, blow back pilot arc non-touch the metal start the arc, plasma cutter machine has two connection ports: 2-pin connector for arc voltage output (1:1 ratio) and 5-pin connector for signal control. This design makes it easy to work with CNC cutting tables.
  • [Air Sensor Technology]: The air sensor built in machine displays air pressure on front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). Air filter is installed in the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 70 PSI, with a flow rate of 250 liters per minute. Note: The compressor needs to be purchased separately.
  • [LED Screen Display]: The screen centrally displays parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If the plasma cutter cannot work, the screen comes with an error code, making it easy to find out the problems.
  • [2T/4T/PA/PT Function]: Adjustable post flow (3-15s) cools the torch and extends consumable life. PA timing up to 15s for mesh cutting or longer consumable durability. 2T/4T mode enables flexible cutting control with reduced finger fatigue.
Package Included

1 x Plasma cutter
1 x Earth clamp with 10-25 plug
1 x Cutting torch
1 x Air hose
1 x Wire adaptor
2 x Aviation plug
2 x Hose clamp
2 xElectrode
2 x0.030" Nozzle
2 x0.043" Nozzle

Frequently Bought Together

Quick view IPT60 Plasma Cutting Torch Tip Nozzles Kit
IPT60 Plasma Cutting Torch Tip Nozzles Kit
$45.99 $46.99
Quick view CNC Plasma Cutting Torch IPTM60 20FT
CNC Plasma Cutting Torch IPTM60 20FT
$159.00
Quick view bestarc Magnetic MIG TIG Welding Torch Holder
bestarc Magnetic MIG TIG Welding Torch Holder
$12.99 $15.99

visamasteramerican expresspaypalmaestroshopify paygoogle payapple pay

Shipping Info with Image Below

Free Fast Shipping Experience peace of mind with our trusted logistics
Shipping Illustration

Ask a Question
Product description
Parameter
Warranty
Customer Review
Video Review

参数表格

Model BTC500DP 10GEN
220V 110/220V
Power Supply / Phases (V-Ph) 220V ±15% 110V ±10% 220V ±15%
Duty Cycle @ 78°F (25°C) 60% 60%
Rated Power (KVA) 6.3 4.2 6.3
Input Current Range (A) 12 - 29 20 - 38.5 12 - 29
Output Current Range (A) 15 - 50 15 - 35 15 - 50
Rated Output Voltage (V) 100 94 100
No-Load Voltage (Open Circuit)(V) 274 274
Efficiency (%) 60 60
Insulation Class F F
Protection Class IP21S IP21S
Plasma Arc Starting Non - Touch Non - Touch
Air Flow Pressure Range (PSI) 30-60psi 20-40psi 30-60psi
Air Flow Rate (CFM) 150L/min 150L/min
Clean Cutting Thickness (mm) 14mm 10mm 14mm
Cutting Thickness Severance (mm) 16mm@65psi 12mm@65psi 16mm@65psi
Cutting Speed 10mm 200mm/min@65psi 150mm/min@65psi 200mm/min@65psi
Machine Dimensions (mm) 410*156*264mm 410*156*264mm
Shipping Weight (kgs) 5.7kgs 5.7kgs

🛡️3-Year Warranty 
All Bestarc machines are covered by a 3-year warranty. 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
wow

Which plasma cutter does it highly recommend .upgraded to this one from 500xp as it was out of stock nothing I regret came in about 7 days within ERUOPA

Product description

Parameter

参数表格

Model BTC500DP 10GEN
220V 110/220V
Power Supply / Phases (V-Ph) 220V ±15% 110V ±10% 220V ±15%
Duty Cycle @ 78°F (25°C) 60% 60%
Rated Power (KVA) 6.3 4.2 6.3
Input Current Range (A) 12 - 29 20 - 38.5 12 - 29
Output Current Range (A) 15 - 50 15 - 35 15 - 50
Rated Output Voltage (V) 100 94 100
No-Load Voltage (Open Circuit)(V) 274 274
Efficiency (%) 60 60
Insulation Class F F
Protection Class IP21S IP21S
Plasma Arc Starting Non - Touch Non - Touch
Air Flow Pressure Range (PSI) 30-60psi 20-40psi 30-60psi
Air Flow Rate (CFM) 150L/min 150L/min
Clean Cutting Thickness (mm) 14mm 10mm 14mm
Cutting Thickness Severance (mm) 16mm@65psi 12mm@65psi 16mm@65psi
Cutting Speed 10mm 200mm/min@65psi 150mm/min@65psi 200mm/min@65psi
Machine Dimensions (mm) 410*156*264mm 410*156*264mm
Shipping Weight (kgs) 5.7kgs 5.7kgs

Warranty

🛡️3-Year Warranty 
All Bestarc machines are covered by a 3-year warranty. 

Customer Review

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
wow

Which plasma cutter does it highly recommend .upgraded to this one from 500xp as it was out of stock nothing I regret came in about 7 days within ERUOPA

Video Review