APP Pilot Arc Plasma Cutter, 50Amps IGBT Inverter 110/220V Dual Voltage, Grid Plate Cut, Rust Removal

$269.99 USD

3 Year Warranty

Plug specification: US( 110/220V )

US( 110/220V )
Compare

Features:
1. Cuts steel, aluminum, copper, and other conductive metals;
2. Easy to set up; features PT/2T/4T/PA modes;
3. Equipped with a large LED display;
4. Recommended cutting capacities: 12 mm at 110V/35A/50 PSI and 20 mm at 220V/50A/65 PSI;
5. Recommended circuit breaker ratings: up to 40A for 110V and up to 30A for 220V.

Key Features & Benefits
  • [Smart APP Remote Control Distance to 98 feet] Control this plasma cutter remotely via Bluetooth APP from up to 98 feet (30 meters) away. Adjust cutting current, switch modes, save your preferred settings, and use remote diagnostics to check operating conditions in real time-no need to walk back to the machine. This smart design improves flexibility and efficiency for car repairing, workshop, farm, hobbies repairing, small job projects, Home, DIY.
  • [Non-Touch Pilot Arc & Air Sensor] The built-in air sensor monitors air pressure and alerts you when pressure is too low or too high. Unlike basic cutters that leave you guessing, this machine features a three-color breathing status indicator and fault code display for instant troubleshooting. The high-frequency non-touch pilot arc starts cuts without direct contact, handling rusty, painted, dirty or rough metal while reducing torch sticking and electrode wear.
  • [Dual Voltage 110/220V IGBT Power] Advanced IGBT inverter technology delivers strong, stable 50A cutting on either 110V or 220V. Cuts steel, aluminum, copper and other conductive metals up to 3/4 inch (20 mm). Recommended capacity: 10 mm @ 35A on 110V / 50 PSI; 18 mm @ 50A on 220V / 65 PSI. Clean, dry compressed air required. Recommended circuit breaker: up to 60A @ 110V; up to 50A @ 220V.
  • [2T/4T with Adjustable PA/PT & Rust Removal] 2T mode is ideal for short cuts; 4T mode enables continuous cutting without holding the trigger. Adjustable PA (pilot arc) time from 3–15 seconds helps maintain the arc on expanded metal, mesh or interrupted cuts. PT post-flow 3–15 seconds cools the torch to protect consumables. The rust removal mode strips oxidation, paint and light contaminants to prep metal surfaces for welding and repair.
  • [Ready to Cut in 1 Minute, ANSI Certified] Pre-installed air filter and 1/4 NPT quick connector simplify setup so you can connect the air line and start cutting in under 60 seconds. Recommended air pressure: up to 65 PSI, airflow rate: 250 L/min. Built with full safety protection against over-current, over-voltage, overload.
Package Included

1x Plasma cutter
1x Wire adapter
1x Dust Cover
2 x Tip(Nozzle)
2xElectrode
2 x Hose clamp
1 x 1/4" NPT air fitting
1xPC8-02
1 x Earth clamp
1 x Air hose
1 x Cutting torch

Frequently Bought Together

Quick view AG60P Plasma Cutting Torch
AG60P Plasma Cutting Torch
$49.99
Quick view bestarc plasma cutter torch consumables kit with storage box, nozzle, electrode and shield cup set
bestarc AG60P Cutting Torch Tip Nozzles Kit with Storage Box 50PCS
$30.99 $49.99
Quick view bestarc AG60P Cutting Torch Tip Nozzles Kit 40PCS
bestarc AG60P Cutting Torch Tip Nozzles Kit 40PCS
$21.99 $34.99
Quick view bestarc AG60P Plasma Cutter Consumables 50PCS
bestarc AG60P Plasma Cutter Consumables 50PCS
$25.99 $39.99

visamasteramerican expresspaypalmaestroshopify paygoogle payapple pay

Shipping Info with Image Below

Free Fast Shipping Experience peace of mind with our trusted logistics
Shipping Illustration

Ask a Question
Product description
Parameter
Warranty
Customer Review
Video Review

BTC500DP Pro Specifications

Model BTC500DP Pro
220V 110V
Power Supply / Phases (V-Ph) 220V ±15% 110V ±10%
Duty Cycle @ 78°F (25°C) 50% 50%
Rated Power (KVA) 5.75 4.5
Input Current Range (A) 15 - 35 15 - 40
Output Current Range (A) 20 - 50 20 - 35
Rated Output Voltage (V) 88 - 96 88 - 94
No-Load Voltage (Open Circuit) (V) 296 296
Efficiency (%) 75 75
Insulation Class F F
Protection Class IP21S IP21S
Plasma Arc Starting Non-Touch Non-Touch
Air Flow Pressure Range (PSI) 25 - 70 psi 30 - 50 psi
Air Flow Rate (L/min) 150 L/min 150 L/min
Clean Cutting Thickness (mm) 12mm 8mm
Cutting Thickness Severance (mm) 18mm @ 70psi 12mm @ 50psi
Machine Dimensions (mm) 401.11 × 229.05 × 136.10mm 401.11 × 229.05 × 136.10mm

🛡️3-Year Warranty 
All Bestarc machines are covered by a 3-year warranty. 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Product description

Parameter

BTC500DP Pro Specifications

Model BTC500DP Pro
220V 110V
Power Supply / Phases (V-Ph) 220V ±15% 110V ±10%
Duty Cycle @ 78°F (25°C) 50% 50%
Rated Power (KVA) 5.75 4.5
Input Current Range (A) 15 - 35 15 - 40
Output Current Range (A) 20 - 50 20 - 35
Rated Output Voltage (V) 88 - 96 88 - 94
No-Load Voltage (Open Circuit) (V) 296 296
Efficiency (%) 75 75
Insulation Class F F
Protection Class IP21S IP21S
Plasma Arc Starting Non-Touch Non-Touch
Air Flow Pressure Range (PSI) 25 - 70 psi 30 - 50 psi
Air Flow Rate (L/min) 150 L/min 150 L/min
Clean Cutting Thickness (mm) 12mm 8mm
Cutting Thickness Severance (mm) 18mm @ 70psi 12mm @ 50psi
Machine Dimensions (mm) 401.11 × 229.05 × 136.10mm 401.11 × 229.05 × 136.10mm

Warranty

🛡️3-Year Warranty 
All Bestarc machines are covered by a 3-year warranty. 

Customer Review

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Video Review