bestarc

Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Dual Voltage

In stock, ready to ship

$349.99 USD $259.99 USD SAVE 26%
  • [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
  • [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
  • [Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
  • [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
  • [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.

Plug specification: US( 110/220V )

US( 110/220V )
EU( 240V )
AU( 240V )

visamasteramerican expresspaypalmaestroshopify paygoogle payapple pay
Additional Information
Plug specification

US( 110/220V ), EU( 240V ), AU( 240V )

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
K
Kurt
Bestarc! Really is the best Plasma Cutter in this price range!

Found this brand after watching a few reviews on YouTube. Didn’t take much to convince me that this is the one. Went straight to the Bestarc website and ordered the 7th Gen direct, delivered to Australia. Even got a 25% discount for doing so. I just had to cut off the US 220V plug and replace with an AU 15amp 3 pin. No issues for an electrician, but you’ll sort it out.

I have used this unit, and it performs exactly as I need it to. The LCD display and push button interface are fantastic, and just simply satisfying in a way.

If you’re on the fence…just buy it! You won’t be disappointed.

C
Cindy Wine
Works great but uses a lot of power

It works great now, but took a while to get set up because it was sputtering and throwing the breaker. I'm using it in a home shop (outdoors) with 120V power only and had to put it on its own breaker. If it's on the same outlet as the air compressor it throws the breaker after a short cut. I also cannot use it with an extension cord because it sputters. So I put the air compressor on an extension cord and the cutter goes directly into the outlet.

J
Jose Damian Diaz
Excellent

Outstanding machine.

D
Doug Revette
out of the box didn't reconize 220volts going in

have tried swapping out 110v back 220v till only sees 110v when plugged in to 220v.