BestArc

Plasma Cutter, 80Amp Blow Back Pilot Arc Plasma Cutter, 110V/220V Dual Voltage Non-HF CNC Plasma Cutting Machine, Digital Screen Display (BTC800XP 11GEN 110V/220V)

$899.99 USD $649.99 USD SAVE 28%
  • [CNC Function]: bestarc plasma cutter features a blow back technology, Non-HF pilot arc with CNC capability, which prevents high-frequency signal interference and enhances cutting stability, blow back pilot arc non-touch the metal start the arc, plasma cutter machine has two connection ports: 2-pin connector for arc voltage output (1:1 ratio) and 5-pin connector for signal control. This design makes it easy to work with CNC cutting tables.
  • [Cutting Thickness]: Non-HF pilot arc plasma cutter boasts an automatic detection feature for input voltages of both 110V and 220V, 60% duty cycle single phase. It is recommended for cutting thicknesses up to 14mm at 40A on 110V with 50PSI, 25mm at 80A on 220V with 60PSI. The circuit breaker specifications require a 60A unit for 110V operation and a 50A unit for 220V. This versatile plasma cutter is ideal for use on materials including stainless steel, alloy steel, mild steel, copper, aluminum, etc.
  • [Digital Screen Display]: The CNC plasma cutter's digital screen centrally displays parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations promptly, improving operational efficiency. If blow back plasma cutter can not work, the screen has an error code system, making it easy to find out the problems.
  • [Air Pressure Sensor & Air Compressor]: Plasma cutting machine is furnished with an integrated air pressure sensor, enabling users to regulate air pressure through the built-in regulator. It also comes with a pre-installed air filter equipped with a 1/4 NPT quick-connect fitting, ensuring immediate usability straight from unpacking. The suggested operating pressure for the air compressor falls within the parameters of 90 PSI and delivers a flow rate of 250L/min.
  • [PT/2T/4T/PA Function]: Post-flow cooling time ranging from 3 to 15s extends the torch head and consumables life. The 2T mode on the plasma cutter provides semi-automatic control torch trigger, while the 4T mode enables automatic trigger, free your finger. PA adjusted the time for the pilot arc. This bestarc plasma cutter BTC800XP 11GEN also includes a mesh cutting mode to solve the problem of arc breaking when cutting mesh.
Compare

visamasteramerican expresspaypalmaestroshopify paygoogle payapple pay
Description

BESTARC BTC800XP 11GEN

CNC FUNCTION

BLOW BACK PILOT ARC

SYNERGIC SCREEN DISPLAY

220V POWER PLUG

ACCESSORIES

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)